HOMEProductsRFID SystemsPassive typeSpecifications




Tag Refractory long distance communication tag
DS-1TG
I/F between tag and reader/writer Wireless communication standard Compliant with ISO 18000-4
Communication frequency/method Central frequency 2.45GHz/microwave
Recommended transmission distance *1 For DS-10RW Reading: from 30 to 800mm Writing: from 30 to 800mm
For DS-5RW Reading: from 30 to 280mm Writing: from 30 to 280mm
Transmission time Reading data (8 byte): 12msec or less, Writing data (1 byte): 25msec or less
Rewritability Over 100,000 times
Memory capacity 224 byte (User area: 206 byte)
Operation ambient temperature In saving data From -55 to 150 degree Celsius *2
In reading/writing data From -40 to 85 degree Celsius
Operation ambient humidity No condensing
Storage ambient temperature From -55 to 95 degree Celsius
Vibration resistance Compliant with JIS 60068-2-6: 1999 (from 10 to 55Hz, double amplitude 2mm, 2 hours each in X, Y, and Z directions)
Shock resistance Compliant with JIS 60068-2-27: 1995 (980m/s2, 6ms, 3 times each in X, Y, and Z directions)
Protective structure IEC standard IP-67 (dust-proof, water-proof)
Chemical resistance Neutral/Alkaline detergent can be used
Case material PEI: polyetherimide
Dimensions (mm) 86.5 x 15.6 x 7.9
Weight Approx. 8g
*1 The maximum range in a condition where there are no obstacles nor things using the same wave length. The range may vary in a different condition.
*2 As long as the total time of exposure to high temperature from 95 to 150 degree Celsius does not exceed 1,000 hours, this product can tolerate temperature cycle from 0 to 150 degree Celsius up to 2,000 times.

Tag Long range tag Tag for metallic objects
RZ-1TG4 RZ-2TG1A
Memory capacity *3 User area 110 bytes
System area 18 bytes
Possible rewriting times More than 100,000 times
Operation ambient temperature
(
degree Celsius)
-30 to 85 -40 to 85
Protective structure JIS C 0920 Protection Standard Class 7(water resistant)
Weight (g) About 24 About 8
*3 The device is EEPROM.

Reader/writer with an integrated antenna Short distance type Intermediate distance type
DS-5RW DS-10RW
Radio station type Premises radio station (applied standard: RCR STD-1)
*license needed
Communication system Supporting Intellitag protocol (Compliant with ISO 18000-4)
Transmission frequency 2450MHz(2427MHz to 2470.75MHz)/ narrow-band system, variable with 5MHz steps
Output power 300mW
Transmission speed Between reader/writer and tag: 40kbps

Transmission distance
(Maximum
*4)
(mm)

Long range tag
(RZ-1TG4)
Reading: 50 to 650 (1,000),
Writing: 50 to 650 (650)
Reading: 50 to 1,300 (2,000),
Writing 50 to 1,300 (1,300)
Tag for metallic objects
(RZ-2TG1A)
Reading: 30 to 250 (400),
Writing: 30 to 250 (250)
Reading: 30 to 650 (1,000),
Writing 30 to 650 (650)
CM tag
(RI-3TG3)
Reading: 0 to 100 (170),
Writing: 0 to 100 (100)
Reading: 0 to 250 (400),
Writing 0 to 250 (250)
Power source Voltage: 14 to 16V, Current: 400mA(Supplied from ID controller)
Operation ambient temperature
(
degree Celsius)
-20 to 60
Protective structure Compliant with IP-65
Weight (g) About 920 About 1,750
*4 The maximum range in a condition where there are no obstacles nor things using the same wave length. The range may vary in a different condition.

ID controller Independent type PLC-mount type
DS-32D JW-23DU(for JW300/30H/20H)
Higher-unit interface RS232C/RS422A/DeviceNet
*In case of RS422A or DeviceNet, up to 16 units can be connected.
PLC bus connection (mounted to the base slot)
*unit type: special I/O
Reader-writer interface Available reader/writer: up to two units, Communication standard: RS422A, Communication distance: 1km maximum, Power source: supplying 15VDC with the reader/writer
Parallel I/O interface Input: two points(24VDC, 5.5mA)
Output: two points(5VDC to 24VDC, 50mA per point, NPN transistor output)
---
Peripheral device interface RS232C/RS422A, supporting the same special command as is used in higher-level interface
Power source For controller and antenna: 24VDC +/-10%,
600mA (Using special external power source)
For controller: 5VDC, 300mA(Supplying from PLC)
For reader/writer: 24VDC, 400mA(Using special external power source)
Operation ambient temperature
(degree Celsius)
0 to 55
Protective structure No waterproof
Weight (g) About 400 About 300



Dimensions(unit:mm)



HOMEProductsRFID SystemsPassive typeSpecifications
PreviousTo the top of this page