 |
|
Model name |
Outline |
Appropriate to: |
| UL/CSA |
CE |
|
JW-20DN2 |
For JW20H/30H/300 series, master or slave mode can be selected. *1 |
|
 |
|
JW-50DN2 |
For JW50H/70H/100H series, master or slave mode can be selected. *2 |
|
|
|
| *1 |
JW-20DN2 is the successor model with upward compatibility of conventional JW-20DN, and terminating resistance switch and other functions are added. |
| *2 |
JW-50DN2 is the successor model with upward compatibility of conventional JW-50DN, and high-speed internal processing and other improvements were made. |
|
 |
|
Model name |
Outline |
Appropriate to: |
| UL/CSA |
CE |
|
16 points |
JW-D164NH |
Input 16 points: 24VDC, 6mA (24VDC) *3 |
|
|
|
JW-D162SH |
Output 16 points: 24VDC, 0.3A, transistor output (sink mode output) *3 |
|
|
JW-D165SH
 |
Output 16 points: 24VDC, 0.3A, transistor output (source mode output) |
|
|
|
JW-D162MH |
Input 8 points: 24VDC, 6mA (24VDC), Output 8 points: 24VDC, 0.3A, transistor output (sink mode output) *3 |
|
|
JW-D165MH
|
Input 8 points: 24VDC, 6mA (24VDC), Output 8 points: 24VDC, 0.3A, transistor output (source mode output) |
|
|
|
32 points |
JW-D324NH |
Input 32 points: 24VDC, 6mA (24VDC) |
|
|
|
JW-D322SH |
Output 32 points: 24VDC, 0.3A, transistor output (sink mode output) |
|
|
|
JW-D322MH |
Input 16 points: 24VDC, 6mA (24VDC), Output 16 points: 24VDC, 0.3A, transistor output (sink mode output) |
|
|
|
| *3 |
JW-D164NH/D162SH/D162MH are the successor models with upward compatibility of conventional JW- D164N/D162S/D162M, and high-speed internal processing is realized. |
System configuration
Performance specifications of DeviceNet master module
|
Item |
JW-50DN2 |
JW-20DN2 |
|
Applicable PLC |
JW50H/70H/100H |
JW20H/30H/300 |
|
No. of mountable PLC main units |
2 max (onto basic rack panel) |
4 max (onto basic rack panel) |
|
Topology |
Multidrop method, T-branch method |
|
No. of nodes |
Max.63 nodes/slave to 1 node/master |
|
Communication service |
Polling I/O function, Bit Strobe function, Explicit message function |
|
Communication speed |
125 kbps, 250 kbps, 500kbps selectable |
|
Communication distance |
Total length of distance: 100m (500kbps), 250m (250kbps), 500m (125kbps) |
|
Transmission media |
Dedicated cable |
|
Data table allocation in master mode |
1) Transfer allocation
2) Uniform allocation and
3) Free node area assurance is selectable as I/O data mapping in scan list edit mode. |
|
I/O points |
4,096 points (125 bytes) as I/O data table |
|
Setting of I/O bytes in slave mode |
Input byte: 0 to 127 bytes
Output byte: 0 to 127 bytes |
|
Communication specifications of DeviceNet slave module
|
Item |
Specification |
|
Communication service |
Polling I/O function, Bit Strobe function |
|
Communication speed |
125 kbps, 250 kbps, 500kbps selectable |
|
Communication distance |
Total length of distance: 100m (500kbps), 250m (250kbps), 500m (125kbps) |
|
Transmission media |
Dedicated cable |
|
General specifications of DeviceNet slave module
|
Item |
JW-D164NH/D162SH/D162MH
|
JW-D324NH/D322SH/D322MH
|
JW-D165SH/D165MH
|
|
Module operating power voltage /power current |
24VDC (20.4 to26.4V)/Max. 70mA |
|
Communication power voltage /Power current |
11 to 25VDC/ Max. 40mA |
|
Storage temperature |
-20 to 70 degrees |
|
Ambient temperature/ humidity |
0 to 55 degrees/35 to 90% (non-condensing) |
|
Atmosphere |
Free from corrosive gas |
|
Vibration resistance |
JIS C0911 or equivalent |
|
Shock resistance |
JIS C0911 or equivalent, 98m/s2 (3 times each in X, Y, and Z direction) |
|
Insulation type |
Photocoupler |
|
Insulation resistance |
10M ohm or more with a 500VDC megger (between external terminal and internal circuit) |
|
Dielectric strength |
500VAC, 50/60Hz, 1 minute(between external terminal and internal circuit) |
500VAC, 1 minute (between external terminal and internal circuit) |
|
External cable connecting method (communication section, power supply section and I/O section) |
26P detachable terminal block (M3.5 x7 screws) |
38P detachable terminal block (M3.5 x 7 screws), with common terminal block (20P), DeviceNet communication connector |
|
Installation |
Mounted with screws (M3 screw) or with DIN rail (35mm DIN rail) |
|
Shape |
130 (W) x 50 (H) x 55 (D) |
200 (W) x 75.7 (H) x 50 (D) |
|
Weight |
Approx. 250g |
Approx. 400g |
|
Accessory |
Instruction manual x 1 |
Instruction manual x 1, DeviceNet communication connector (Phoenix Contact MSTB2.5/5- STF-5.08AUM) |
|
I/O terminal specification of DeviceNet slave module
|
Item |
JW-D164NH |
JW-D324NH |
|
No. of input |
16 points (occupied byte: 2 bytes) |
32 points (occupied byte: 4 bytes) |
|
Rated input voltage |
24VDC (20.4 to 26.4V) |
|
Rated input current |
Approx. 6mA (at 24V), input impedance: approx. 4K ohm |
|
Input ON/OFF level |
ON level: 18V max.(3mA max.), OFF level: 8V min. (1.5mA min.) |
Input response time
(single unit) |
OFF -> ON: 1ms max. (24VDC)
ON -> OFF: 1ms max. (24VDC) |
|
Common type |
1 common line for 8 points, no common polarity |
1 common line for 16 points, no common polarity |
|
Common terminal |
- |
20 points (all points short), can be split as 10 points x 2 |
|
|
Item |
JW-D162SH |
JW-D165SH
 |
JW-D322SH |
|
No. of output |
16 points (occupied byte: 2 bytes) |
32 points (occupied byte: 4 bytes) |
|
Output method |
Sink mode output |
Source mode output |
Sink mode output |
|
Rated output voltage |
24VDC (20.4 to 26.4V) |
|
Output current |
300mA max/point, 1.5A/8-point common, allowable surge current 1A (100mS) |
300mA max/point, 3A/16-point common(1.5A/8-point common x 4), allowable surge current 1A (100mS) |
|
Voltage drop at ON *4 |
0.5V max. |
1.2V max. |
0.5V max. |
|
Leak current at OFF |
0.1mA max. |
|
Output response time (single unit) |
OFF -> ON: 1ms max. (24VDC)
ON -> OFF: 1ms max. (24VDC)* with resistor as load |
|
Protection circuit |
Surge killer |
Zener diode |
|
Fuse |
A 2A fuse built in (not replaceable) per common line Meltdown detection function provided (fuse lamp lights up when the fuse melted down or output power turned off) |
|
Common type |
1 common line for 8 points, Minus polarity |
1 common line for 8 points, Plus polarity |
1 common line for 16 points, Minus polarity |
| Common terminal |
- |
20 points (all points short), can be split as 10 points x 2 |
|
|
Item |
JW-D162MH |
JW-D165MH
|
JW-D322MH |
|
No. of input/output |
16 points (occupied byte: 2 bytes) *5 |
32 points (occupied byte: 4 bytes) *6 |
|
Input |
Rated input voltage |
24VDC (20.4 to 26.4V) |
|
Rated input current |
Approx. 6mA (at 24V), input impedance: approx. 4K ohm |
|
Input ON/OFF level |
ON level: 18V max.(3mA max.), OFF level: 8V min.(1.5mA min.) |
|
Input response time (single unit) |
OFF -> ON: 1ms max. (24VDC)
ON -> OFF: 1ms max. (24VDC) |
|
Common type |
1 common line for 8 points, no common polarity |
1 common line for 16 points, no common polarity |
|
Output |
Output method |
Sink mode output |
Source mode output |
Sink mode output |
|
Rated output voltage |
24VDC (21.4 to 26.6V) |
|
Output current |
300mA max/point, 1.5A/8-point common, allowable surge current 1A (100mS) |
300mA max/point, 3A/16-point common (1.5A/8-point common x 2), allowable surge current 1A (100mS) |
|
Voltage drop at ON *4 |
0.5V max. |
1.2V max. |
0.5V max. |
|
Leak current at OFF |
0.1mA max. |
|
Output response time (single unit) |
OFF -> ON: 1ms max. (24VDC)
ON -> OFF: 1ms max. (24VDC)* with resistor as load |
|
Protection circuit |
Surge killer |
Zener diode |
|
Fuse |
A 2A fuse built in (not replaceable) per common line Meltdown detection function provided (fuse lamp lights up when the fuse melted down or output power turned off) |
|
Common type |
1 common line for 8 points, Minus polarity |
1 common line for 8 points, Plus polarity |
1 common line for 16 points, Minus polarity |
|
Common terminal |
- |
10 points (all points short) x 2 |
|
| *4 |
Output current: at 300mA |
| *5 |
Allocation is; 8-point input for the first half, and 8-point output for the second half. |
| *6 |
Allocation is; 16-point input for the first half, and 16-point output for the second half. |
External Dimensional Drawing
|
